Car Locks Repair
A locksmith for cars is usually capable of working with both manual and electric door locks. Manual lock problems are more frequent, but they can be a pain to deal with.
WD-40 is a good oil to use in the winter. It will help to displace moisture and prevent it from freezing within the keyhole.
Door Lock Cylinder Replacement
If you lost your car keys, or suspect someone else has, it's a good idea to replace the door lock cylinders as soon as you can. This will ensure that you're the only person who has the ability to open your car and keep burglars and other unauthorised individuals out of it. It isn't always easy to replace a car door lock cylinder, since it typically requires disassembling the door's interior. This isn't a task that many people would like to attempt by themselves, as it could be extremely dangerous when done incorrectly.
The lock cylinder is removed from the handle first. You'll need to locate the screw at the top of the lock housing (usually the upper right corner). It may be hidden behind some plastic pieces or just barely visible. If you cannot locate it, use a screwdriver to remove any trim panels that are blocking your view of the screw. Then, use a pick or awl or a small screwdriver to open the tab on the lock cylinder that holds it and pull the cylinder straight out of the housing.
Once the cylinder has been removed and reassembled, there are some things to do to prepare it to use. The keyway should be cleaned of grease and dirt and the cylinder needs to be lubricated in order to prevent it from getting stuck in the lock. This can be accomplished by using brake cleaner. It will clean and lubricate all parts of the lock cylinder. After cleaning the cylinder you can take off the 10mm bolt that connects the handle to cylinder housing with the help of a screwdriver.
You can then install the new cylinder and use it with your original key. It is a good idea to choose one that is the same brand and model of the one you have because it is more likely to fit correctly and seal securely. Once it is installed, test the door to ensure that the lock works properly and the door is closed securely.
Door Lock Cylinder Repair
The lock cylinder on your car is the part that the key goes into to unlock or lock the door. If you're having trouble turning the key inside the lock or it becomes stuck, this is an indication that the cylinder of your door may be damaged and need replacing.
It's usually located near the door handle, however some cars have them hidden behind a plastic piece. When you turn the key, the pins of the cylinder align with the cuts on the key head which allows you to move the lock and unlock the car door. If you have a cylinder that is mounted on the surface remove the faceplate from the door handle, then remove one or two cylinder setscrews.
After the screw has been removed, you can spin it until you are able to remove the door. Be cautious not to lose any screws when you do this, so put them in a bag or safe spot so that you can replace them later. Next, take the key and put it inside the lock to determine if the tumblers/pins are moving freely or becoming stuck. If you hear or feel a click or the cylinder is stuck then it's time to replace it.
You can purchase new cylinders at any auto parts store, but you will need to know your car's make and model before you go shopping. You can also contact an locksmith to change the door cylinder. They'll be able to match the new lock to your current key, meaning you can continue to use the lock you have in your possession.
The most frequent issue is that the cylinder does not rotate when you turn the key. This could be due corrosion or dirt that has built up, preventing the cylinder from moving freely. It is possible to solve by applying lubrication to the mechanism. You can make use of brake cleaner or white grease to eliminate any rust and grime. This method is only effective on a cylinder that has become jammed. It will not fix any other issues.
Door Lock Repair
Rust, dirt or other debris can cause the door lock to become jammed. It is often possible to fix this by spraying the lock with a lubricant, such as WD-40. car door locks will help to unjam the mechanism, and will also stop the problem from occurring in the future. If you cannot turn the lock, try wiggling the rod with needle-nosed pliers. If this doesn't help, you should call locksmiths to replace the lock.
Misalignment is another common problem when it comes to door locks. This could make the lock difficult to use and is a security concern because it makes the door more difficult to get around in a burglary attempt. This issue can be fixed by a locksmith. However, it is typically possible to fix the issue yourself.
Start by examining the lock to determine what's causing it to stop working properly. If the problem is due to a deadbolt that is not aligned properly or a strike plate then tighten the screws that hold these components. Reposition the bolt and strikeplate to align them with the door frame.
A little graphite can be used to resolve the issue when the key won't move or turn. You can apply graphite by squeezing the tube or dusting an old key. After that, you can insert the key and press it several times to incorporate the graphite into the mechanism. If this doesn't work, you can remove the doorknob and check the spindle. It might be worn out.
The procedure for removing the door handle or the door panel is different from vehicle to vehicle, however the general procedure is similar. After removing the panel, you will have to locate the set screws that hold the lock cylinder. These are usually located in the middle of the panel or on the inside of the door handle depending on the brand and model. Remove the screws and then carefully align the cylinder with the keyway. There is a risk of damaging the components if you tighten too much the screws.
Door Lock Replacement
If your lock is deteriorating or looks a bit old, replacing it could give you a new appearance. It's a simple task that can be completed at home using only a few simple steps. Make sure you be sure to take measurements of your door's latch and deadbolt settings, as you will need to make sure that the new locks are correctly set.
Begin by removing the screws that hold the knob plate inside to the door. Then, pull the knob as well as latch off. If the plate inside is decorative and does not have screws, carefully lift it up using a screwdriver. It may be held in place by pins or it could snap off at the edges. After the plate is removed, it is easy to take off the deadbolt as well as the latch.
Now is the time to put the new lock plates into the proper position. Make sure that the inside and exterior plates are aligned over the deadbolt hole on the jamb for the door and that the long metal spindle from the lock cylinder mechanism moving through both holes. After the plates are in place, hand-thread the screws into the holes to hold the plates together. If the plate does not have any screw holes, you can just slide it over the latch.
When putting the lock back together, make sure not to reuse the existing screws (unless you have the identical color). Use the screws that came in your new lock kit instead. If you don't have the correct size of screws, then go to your hardware store or home improvement store and buy screws that match the rest of your door lock's hardware.
Make sure that your new latch plates and deadbolts are of the same length as the originals, and they're aligned with the hole in the jamb. After all the components are in place, tighten the remaining screws. You can now check the latch and deadbolt using your key. If the key isn't turning you can call a locksmith.